XPM-1080RN Automatic Film Laminating Machine
With Hot Knife
Glue laminating/ Thermal laminating
PET/PVC/BOPP/CCP/Metallized film/Soft touched film…..
Main Parameter
Max. sheet size | 1080*1500 mm |
Min. sheet size | 350*270 mm |
Paper thickness | Disc Cutter 80-500 Gsm Hot Knife >127 gsm |
Height of feeding pile | 1160 mm |
Height of stacker pile | 1260 mm |
Machine speed | 105 m/min |
Working speed | Disc cutter 80-100 m/min Hot knife 70-80 m/min |
Machine power | 85 kw |
Working power | 30-35 kw/h |
Dimension of machine | L12000×W3100×H3100 mm |
Machine weight | 11500 kg |
Available size W 1080 m * L 1000 mm//1100 mm/1300 mm/1500 mm/1700 mmm W 1280 m * L 1000 mm/1100 mm/1300 mm/1500 mm/1700 mmm W 1480 m * L 1000 mm/1100 mm/1300 mm/1500 mm/1700 mmm | |
Configuration & Functions
1.Automatic Feeder: Adopts offset feeder with advanced side lay, which fastest can feed around15000 sheet/h. Non-stop and pre-stack feeding can improve work efficiency.
2.Overlapping Regulator: AdoptsServo system to control the overlapping that guarantee accurate and stable, and make sure the overlap error within 2 mm.
3. Drying and Heating System:Bulk 800 mm diameter drying roll with Teflon coating, that could bring the highest glue drying effect, large heating roll by electromagnetic heating plus oil heating, guarantee the heatingefficiency and make sure laminating quality when run in high speed.
4.Main Machine Body:Thicken machine wall (25 mm thickness) enhances stability and for long time service life.
5. Three RowsChain Driving System: Special structure design in minimum transmission line, adopts three rows chain to drive the laminating unit to guarantee the high laminating speed with low noise.
6.Pneumatic Pressure System: fully pneumatic system to control the laminating pressure, the pressure would highly uniformand easy to adjust.
7.Man-Machine Interface System:Advanced 10 inch color screen with PLC system makes the operation easy and convenient.
8.Hot Knife:Adopts double servo systems to control cutting precision, and the knife is under 600 degrees heating treatment that would never shape change. Top Baumer sensor make sure the machine running in high precision
9.Anti-Curvature Device: Avoid paper curvature and smooth the paper,especially for thin paper.
10.CorrugatedDelivery:Better and easier for collecting paper.
11 Car Body:Whole machine cover adopts car body, glossy and wear-resisting.
12 Automatic Stacker: Fully automatic with sensor to rise and down the paper pile, heighten structure that can load paper pile height in 1060 mm, side and front tidy devices to make sure paper pile collect well.
13.Meet with LED lights:New design cover makes machine looking more advanced,a intelligent screen in stacker can show machine running speed or completed sheets.
Wenzhou Xiaopai Electric Power Technology Co., Ltd. — Your One-Stop Flexible Packaging Solution Provider
Headquartered in Wenzhou, China — a leading hub for packaging machinery manufacturing — Wenzhou Xiaopai Electric Power Technology Co., Ltd. specializes in the integration, sales, and technical service of flexible packaging equipment. We are committed to providing global customers with one-stop flexible packaging line solutions and full-lifecycle service support.
Complete Line Coverage, Turnkey Delivery
We supply equipment covering the entire flexible packaging production workflow: Film Blowing → Solventless Lamination → Printing → Slitting → Paper Tube Cutting. With a single supplier handling line planning, equipment selection, installation, commissioning, and after-sales support, you get a truly turnkey solution — one partner, one complete line.
Frequently asked questions
1. What is the difference between the two models?
XPM-1080RN is the hot-knife film laminating machine in sheet format; XPM-1100J is the roll-to-roll configuration. Format is confirmed at order, since the same hot-knife principle is built in both. The deciding question is not speed but whether a cutting knife exists downstream — that determines whether you need sheet or roll format.
2. What is a hot knife used for?
It cuts and seals the laminated sheet in one operation, producing a clean edge without loose film. This matters for board-based packaging and for short-run work where a separate cutting step would add handling.
3. Which substrates can be processed?
Paper, board and printed sheets with film, within the machine's thickness and format range. The combination of substrate and film adhesive must be qualified: the machine applies heat and pressure, it does not change the adhesive's compatibility.
4. Why choose hot knife lamination instead of solventless?
They solve different problems. Hot knife is for sheet-fed, lower-volume decorative or protective lamination; solventless is for high-volume flexible packaging structures. Comparing them on price per machine is meaningless — the output and the product are different.
5. How is temperature and pressure controlled?
Through controlled heating of the knife and adjustable nip pressure, with the settings recorded per substrate and film combination. Temperature too low gives poor bond; too high marks the surface or curls the sheet.
6. What are the maintenance points?
Knife condition, heater element, nip roller cleanliness and drive belts. A dull knife produces a ragged edge that looks like a lamination defect, so knife inspection belongs in the routine, not in the breakdown list.
7. What is the typical site requirement?
Stable power supply, level floor and sufficient space for sheet handling at both ends. For sheet-fed machines the handling space is often underestimated and becomes the real constraint on output.
8. Who manufactures and supports the machine?
The hot knife laminating machines are manufactured by SINSTAR. XIAOPAI supplies them as authorised worldwide distributor and provides specification support, documentation and after-sales coordination.
