Chinese Oil-Immersed Transformer: How to Read the Model

2026-11-19 10:32 XIAOPAI
XIAOPAI · Wenzhou Xiaopai Electric Power Technology Co., Ltd. · Zhejiang, China

A Chinese oil-immersed transformer usually arrives with a model number like S11-M-100/10-0.4. Buyers tend to treat that string as a part number and ask for a datasheet instead. It is faster to read the string.

Every field in it answers a question you would otherwise put in an email: three-phase or single, which loss level, sealed tank or not, how many kVA, and which two voltages.

THE LETTERS BEFORE THE DASH

S means three-phase. A single-phase unit carries D instead, as in D-100/6.9, where the primary is 6.9 kV.

M means a sealed tank: the corrugated wall absorbs the oil expansion, so there is no conservator and no silica-gel breather to maintain. A model without M is the older conservator design.

Z means on-load tap changing. A model like SZ9-2500/35-0.4 carries nineteen tap positions, which makes it a different machine from a unit with an off-circuit tap link.

SCB is a different family altogether: cast-resin dry-type, no oil at all. If the number starts with SCB, none of the oil-related advice below applies.

THE NUMBER STRAIGHT AFTER S

That number is the loss-level code, not the capacity. 9, 11 and 13 are the common ones in Chinese catalogues, and the higher the code, the lower the no-load and load losses the design is built to meet.

So S9 and S11 at the same kVA are not the same purchase. The S11 carries more iron and copper and draws less every hour of the year. If an offer sheet mixes S9 and S11 without saying so, the comparison is not like for like.

A Chinese oil-immersed transformer is often sold on this code alone, so it is the first thing to check against the loss figures in the specification.

THE NUMBERS AFTER THE SLASH

The figure after the dash is capacity in kVA, and 63, 100, 250 and 1,000 are the common steps. Then come the two voltages, high side first. 10-0.4 means 10 kV in, 400 V out. 33-0.4 means 33 kV in, 400 V out. 35-11 means 35 kV in, 11 kV out.

This is the field buyers misread most often. A 33-0.4 unit is not a bigger 10-0.4 unit. It is a unit for a different network, and the insulation alone makes it heavier and larger for the same kVA.

WHAT THE TAIL ADDS

Some models carry a vector group or a tap range at the end. Yd11 means delta on the high side and star on the low side, with an 11 o'clock phase shift. Dyn11 is the same idea with a neutral brought out, which is what a 400 V distribution unit usually needs.

A note like 19 positions describes the tap changer range rather than the winding. Those details change how the unit connects to the network, and they are worth copying into the enquiry exactly as written.

WHAT THE MODEL DOES NOT SAY

It does not say whether the windings are copper or aluminium. That appears in the remarks column of the order, not in the model, and it changes weight, losses and the way the unit behaves under overload.

It does not give impedance, sound level, oil weight, or bushing creepage. Those are specification items, and they have to be asked for. A failed bushing is enough to take a station offline, so the creepage figure is not a detail. Insulator design has moved on for exactly this reason.

One more omission: the model does not state the cooling arrangement or the altitude it is rated for. Both are printed on the nameplate of the finished unit and both are easy to leave out of an enquiry that only names a model.

WHY THE NAMING SYSTEM EXISTS

The code compresses decisions that would otherwise need a paragraph. A buyer who can read it spots a wrong offer in seconds. An S9 offered against an S11 requirement, an M missing where a sealed tank was specified, a 33-0.4 sent for a 10-0.4 site. Each one is visible in the string.

It is also why Chinese suppliers sell by model rather than by description. The string is the specification. Grid build-out in China and plant construction both run on it, at a scale where nobody has time to describe a transformer in prose.

And when a unit fails, the consequence is not abstract. A transformer fire takes the plant with it, which is why the model number is worth checking before the order, not after the unit arrives.

WHO SUPPLIES IT

XIAOPAI builds oil-immersed distribution transformers from 6 kV to 35 kV in Wenzhou, alongside oil-immersed units, dry-type units and the switchgear that protects them.

A Chinese oil-immersed transformer is easier to buy once the model string is read correctly. Most disagreements about these units start with two people reading the same six fields differently.


Name:
Message:
Verification code:
Submit
Comment
contact us
Phone +86 13806536768
Whatsapp
Scan the QR code to inquire